background image

 

Thank  you for purchasing the eLR1-868 radio receiver; we hope that you  will be pleased with  our 
product. Our company makes every effort to ensure top-quality products that can be used for a long 
time without failure.  

NOTE 
eLR1-868H2

 cooperates with  transmitters working  at a 868.3MHz frequency and compatible with 

Keeloq standard. It can memorize up to 

42

 remotes. 

 

eLR1-868H2M

 cooperates with transmitters working at a 868.3MHz frequency and compatible with 

Keeloq standard. It can memorize up to 

1000

 remotes. 

 

eLR1-868S

 receiver was designed for use with transmitters: 

 

Marantec Digital (868.3MHz, FIXED-CODE) 

 

Hormann (868.3MHz FIXED-CODE –grey enclosure, blue buttons ) 

 

 

It can memorize up to 

32

 remotes. 

 

eLR1-868H2/eLR1-868H2M/eLR1-868S

 

INTRODUCTION 

USER’S MANUAL 

Summary of Contents for eLR1-868H2

Page 1: ...868 3MHz frequency and compatible with Keeloq standard It can memorize up to 42 remotes eLR1 868H2M cooperates with transmitters working at a 868 3MHz frequency and compatible with Keeloq standard It can memorize up to 1000 remotes eLR1 868S receiver was designed for use with transmitters Marantec Digital 868 3MHz FIXED CODE Hormann 868 3MHz FIXED CODE grey enclosure blue buttons It can memorize u...

Page 2: ...lating to installation of the driver should be carried out when the device to which we want to incorporate the receiver is powered off The first step of the installation is to assemble the mechanical radio receiver then to connect the outputs and supply voltage In accordance with the applicable regulations on disposal of redundant equipment by private users in the European Union any items with suc...

Page 3: ...ogramming mode which will be indicated by LED flashing To program another remote control push the selected key on it The LED will again flash 3 times etc When the LED flashes 2 times it means that the memory is already full whereas 1 flash means that the receiver has left the remote control programming mode and returned to its normal operation After programming all remote controls you can exit the...

Page 4: ... must be carried out in accordance with the applicable rules on operation of electrical equipment and the occupational health and safety rules The type of electrical system and its protection against electric shock are specified in the standards All the operations can be performed only by properly authorised persons The device must be connected in accordance with the attached description diagram F...

Reviews: