Eldom RapidBlade MT500, Manual, Page: 13 / 52

USE
Shaving
- Use the switch (2) to activate the device.
- Place the blade against the skin and slide it with long strokes, pressing lightly as you go ( Fig. 2 ).
- Note. The surface of the blade should rest flat on the skin ( Fig.3 ).
- Both blade edges can be used for the desired effect ( Figs. 4, 5 and 6 ).
- After you finish shaving, use the button (2) to switch off the device and clean it.
Trimming your hair with the comb
- The device is equipped with a precision comb (4) which allows you to trim your hair to diffe-
rent lengths.
- When trimming for the first time, start with the maximum length setting,
- The settings on the control wheel correspond to the length of the hair (in millimetres) left
after trimming.
- Choose between a length of 0.5 mm and a length of 10 mm.
- Mount the comb (4) on the blade ( Fig. 7 ).
- Enable the device with the switch (2) .
EN 13
2
6
10
3
7
11
4
8
12
5
9