FOT. 2
1. Thermostats
2. Heating plates
3. Control lights
4. Housing
1
1
4
2
2
3
3
Before operating and plugging in the appliance, set thermostats (1)
in the position “MIN” (the appliance switched off).
Position the appliance on a level, dry, stable and high-temperature resistant surface. The housing
(4)
heats up considerably when operated. Thus, the space of at least 5 cm from the sides of the
device should be provided.
To ensure free and safe access to the appliance, place it at a proper height.
- plug in the appliance
- place a dish with products on the heating plate (2)
- switch on the appliance selecting the working temperature of the thermostat (1).
Each heating plate (2) is controlled by a separate thermostat (1).
Both plates can be used at the same time.
Thermostat enables smooth adjustment of the temperature.
Settings 1-3 correspond to the lower temperature proper for heating meals.
Settings 4 - MAX - high temperature intended for cooking. Operation of the appliance is signalled
by the control light (3).
The operation of the appliance is signalled by control lights (3)
.
USER MANUAL
ELECTRIC COOKER PG20
GENERAL DESCRIPTION
OPERATION
During the first activation of the appliance, a specific smell can be emitted from the heating
elements and the insulation. It is a normal occurrence.
In order to ensure safety and high efficiency of the operation, use only dishes with flat bottoms
and of a proper diameter which guarantee stability and good contact of the dish with the heating
plate
CLEANING AND MAINTENANCE
Before cleaning, unplug the appliance and wait until it cools down completely.
- Do not immerse the appliance in water or wash it in a dish-washer machine.
- All surfaces can be cleaned only by wiping them with a soft, damp cloth with the addition
of gentle cleaning agents.
- Do not use abrasive agents.
- power:
a small heating plate: 750W
a large heating plate 1500W
- supply voltage: 230V ~ 50Hz
TECHNICAL DATA
7