Eldom minii C110, Instruction Manual

Page: 9 / 36

EN|9
INSTRUCTION MANUAL
CORDLESS KETTLE
C110
EN
GENERAL DESCRIPTION
1. Spout + net filter
2. Lid release button
3. Opening lid
4. On/off switch
5. Handle
6. Water level indicator
7. Control lamp
8. Base
TECHNICAL DATA
- power: 800 W
- mains voltage: 230V ~ 50Hz
- 0.6 litre capacity
OPERATION
Cordless kettle C110 is for boiling water.
It is possible to boil 0.2 – 0,6 litre of water in the kettle.
The kettle base (8) must be put on a flat and dry surface.
In the base there is some space for an excess cord. It is important for the cord to be led
from the base (8) through a special groove so that the appliance could be stable.
Before using the kettle for the first time fill it up (2-3 times) with water, boil the water and
then empty the kettle.
The kettle can be filled with water directly through the spout (1) or after opening the lid
(3).
In order to open the lid (3) you must pull the button (2).
The kettle must not be filled up when on the base.
The kettle starts working after putting the switch (4) in the position ‘1’.
The kettle working is signalled by the control lamp (7).
The kettle switches off automatically after the water has boiled.
You can stop heating water at any time by putting the switch (4) in the position ‘0’.
1
2
3
4
6
7
8
5