8
HOT AIR STYLER LS1M
Operating instruction
1.
On/Off switch with power settings
2.
Attachment release button
3.
Replacable brushes
4.
Hanging loop
5.
Power cable
GENERAL DESCRIPTION
- power: 400W
- supply voltage: 230V ~ 50Hz
TECHNICAL DETAILS
HOW TO USE THE APPLIANCE
Use the hot air styler for moist or dry hair.
- Mount one of the brushes
(3)
by inserting it carefully into the body.
To remove the attachment
(3)
from the appliance, press the release button
(2)
and pull the attachment off
the appliance. Before you connect the appliance to a power source, make sure that the on/off switch
(1)
is
set to “0”.
- After plugging it in, switch the hot air styler on
(1)
. The switch allows for selecting two levels of warm airflow
and one cool airflow:
setting “1” – gentle airflow, low temperature
setting “2” – strong airflow, higher temperature
setting “
” – cool airflow
Do not hold your hair in the appliance for longer than 20 seconds at one time.
When you have finished styling your hair, switch off the appliance
(1)
and unplug it.
- before you start cleaning the appliance, unplug it and wait until it cools down completely
- clean the housing with a damp cloth
- do not put the appliance into water
- detach the attachment and clean it
- the appliance consists of materials which can be reprocessed or recycled
- the appliance should be disposed of only in approved disposal centres dealing
with electrical and electronic appliances recycling
ENVIRONMENATL PROTECTION
WARRANTY
- the appliance is intended for domestic use only
- the appliance cannot be used for commercial purposes
- the warranty is considered void in event of inappropriate handling.
Detailed warranty provisions are attached
CLEANING AND MAINTANANCE
CAUTION: Do not use the appliance near bathtubs, showers,
swimming pools and similar water reservoirs.
1
3
4
5
2
