2
4
5
6
1. Control panel
2. Base
3. Water tank
4. Cover
5. Nozlle
6. On/off switch
7. Remote control
1
2
3
1. Make sure the appliance is unplugged, and the switch
(1)
is set in the
OFF
position.
2. Remove the nozzle
(5)
and the cover
(4)
from the tank
(3)
3. Take the tank
(3)
off the base of the appliance
(2)
.
4. Turn the tank, unscrew the cap (fig. 2) and fill the tank with water. Fix the cap turning it tight.
5. Place the tank
(3)
on the base
(2)
.
6. Insert the panel
(5)
and the cover
(4)
into opening of the tank
(3)
In the cover there is aroma oil box with the sponge which can be soaked with oil fragrance.
The sponge in the aroma box should be changed.
TANK FILLING
OPERATION
Every change of the settings is confirmed by a beep.
STANDBY MODE
Connect the device to the mains and turn on the switch (6). The device will display
the current humidity.
The humidifier is switched off with the switch (6).
DELAYED START
This function allows the user to set the time, after which the humidifier will automatically
start. The function can only be activated when the device is turned on and in the
standby mode. Press „B” – the icon will be displayed. Set the time with „C” and
„D”. Only full hours in the 1-24 range can be selected. The device will show the lapse
of full hours.
Press „B” to switch the humidifier to the standby mode.
fot. 01
7
ULTRASONIC HUMIDIFIER NUV7
INSTRUCTION MANUAL
GENERAL DESCRIPTION
TECHNICAL DATA
APPLIANCE OPERATION
- power: 30W
- supply voltage: 230V ~ 50Hz
- capacity 4 l
- output 300 30ml/h
- appliance output designed
for the room 15-20m
2
- operation time with full water tank ~ 14 hours
