Eldom droppy C245S, Manual

Page: 9 / 36

EN|9
INSTRUCTION MANUAL
CORDLESS KETTLE
C245S
EN
GENERAL DESCRIPTION
1. Spout + net filter
2. Handle
3. Opening lid
4. Water level indicator
5. On/off control lamp
6. Rotating base
TECHNICAL DATA
- power: 2000 W
- mains voltage:
220-240V ~ 50Hz
- 1.7 litre capacity
OPERATION
Cordless kettle C245SB/C245SC is for boiling water. It is possible to boil 0.5 – 1.7 litre of
water in the kettle.
The kettle base (6) must be put on a flat and dry surface.
In the base there is some space for an excess cord. It is important for the cord to be led from
the base (6) through a special groove so that the appliance could be stable.
Before using the kettle for the first time fill it up (2-3 times) with water, boil the water and
then empty the kettle.
The kettle can be filled with water directly through the spout (1) or after opening
the lid (3) .
The kettle must not be filled up when on the base.
The kettle starts working after putting the switch (5) .
The kettle working is signalled by the control lamp (5) .
The kettle switches off automatically after the water has boiled.
You can stop heating water at any time by putting the switch (5) .
1
2
3
4
5
6