1. Cover of the battery
2. Corpus
3. Switch
4. Frothing end
- power supply: batteries AA, 2 items
The batteries do not belong to
the equipment of the frother.
Before the first usage, one should wash the frothing ending carefully (4) in accordance with the
recommendations contained in the section CLEANING AND MAINTENANCE.
The frother starts its work after pushing and keeping the switch (3). The device works as long as
the button is pushed (3).
POWER SUPPLY
Thee frother requires the supply with 2 batteries AA (1.5V)
How to install the battery:
- rotate the cover (1) counter-clockwise and remove it
- insert the battery – pay attention to the orientation – Fig. 1.
- place the cover (1) and turn clockwise to lock it in place.
Dispose of used batteries in the dedicated containers.
MILK FROTHING
It is recommended to froth cold milk.
Pour in cold milk into the proper dish half its level. Immerse the frothing ending (4) and push the
button (3). During the operation, the frothing ending should be immersed all the time. Ram the
milk until the desired consistence is obtained. Put the milk frothed on the top of coffee and
sprinkle with additions (e.g. sugar, cocoa).
MILK FROTHER SI30
7
CLEANING AND MAINTENANCE
- frothing ending (4) may be washed with adding the washing agent
- the device must not be immersed in water completely – only the frothing ending may be
immersed (4)
- clean the housing with a wet cloth
- the device must not be cleaned with sharp, abrasive cloths or sponges, in this way the
device may be damaged.
User’s Manual for
GENERAL DESCRIPTION
TECHNICAL DATA
OPERATING
2
3
4
1
fot.1
