©
2013 eldoLED. All rights reserved. More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com. V1.3
eldoLED Europe bv
Luchthavenweg 18a
5657 EB Eindhoven
The Netherlands T +31 40 2054050
F +31 40 2054058
eldoLED America, Inc.
1762 Technology Drive # 226
San Jose, CA95110
USA
T +1 408 451 9333
F +1 408 451 9335
Pay attention when connecting the LED groups:
• polarity reversal results in no light output and often damages the LEDs
• com and - of different groups damages the driver
Quick Start Guide DUALdrive 1060/S
(DL1060S1)
Installing DUALdrive 1060/S
A
Mounting the DUALdrive
B
Making the wire connections
WARNING: Risk of electrical shock. May result in serious injury or death. Disconnect power before servicing or installing.
CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building
codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs.
219 mm / 8.64”
50 mm
1.97”
LEDcode / NTC
2 LED groups,
1 control channel
2 LED groups,
1 control channel
{
{
2
9 mm
0.35 inch
1
+
-
0.5-1.5 mm
2
AWG 20-16
+
-
+
-
DALI
{
N
L
VAC
120-277
{
