55
EN
USER MANUAL EWS2 V2.2
3. Fix the siren on the wall using the screws (see Fig. No. 6).
BATTERY
+
-
+
-
+
-
+
-
BATTERY
BATTERY
BATTERY
6
4. Close EWS2 enclosure (see Fig. No. 4, Fig. No. 3, Fig. No. 2).
5. Pair the device with the alarm system using
Eldes Configuration Tool
software. Open
Wireless Device Management
section and enter
the 8-character
Device ID
located on the EWS2 enclosure or select the device icon with a message
NOT CONNECTED
indicated next to
it and click the
Add
button. The device can also be paired by sending a corresponding command via SMS text message. For more details,
please refer to the software‘s HELP section and ELDES alarm system user/installation manual.
7
6. Upon the successful binding process, EWS2 device icon becomes visible in
Wireless Device
section as well as
Battery Level
and
Signal
Level
. If attempt to bind is unsuccessful, try to move EWS2 closer to the alarm system device and bind anew.
7. EWS2 siren is ready for use.
NOTE:
If you are unable to bind the wireless device, please, restore the parameters of the wireless device to default and try again. See
chapter
6. RESTORING DEFAULT PARAMETERS
for more details.
