99
EN
EWP2 User Manual v.1.2
Copyright © “ELDES UAB”, 2014. All rights reserved
It is not allowed to copy and distribute information in this document or pass to a third party without advanced written
authorization by “ELDES UAB”. “ELSDES UAB” reserves the right to update or modify this document and/or related prod-
ucts without a warning. Hereby, “ELDES UAB” declares that the wireless motion detector EWP2 is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be
consulted at www.eldes.lt
7. RESTORING DEFAULT PARAMETERS
1. Remove any battery from EWP2.
2. Press and hold the RESET button.
3. Insert the battery back to EWP2.
4. Hold the RESET button until LED indicator shortly flashes several times.
5. Release the RESET button.
6. Parameters restored to default.
8. ADDITIONAL INFORMATION
Limited Liability
The buyer must agree that the system will reduce the risk of fire, theft, burglary or other dangers but does not guarantee against such
events.“ELDES UAB” will not take any responsibility regarding personal or property or revenue loss while using the system. “ELDES UAB”
liability according to local laws does not exceed value of the purchased system. “ELDES UAB” is not affiliated with any of the Internet providers
therefore is not responsible for the quality of Internet service.
Manufacturer Warranty
This device carries a 24-month warranty by the manufacturer “ELDES UAB”. Warranty period starts from the day the system has been purchased
by the end user. The warranty is valid only if the system has been used as intended, following all guidelines listed in the manual and within
specified operating conditions. Receipt must be kept as a proof of purchase date. The warranty is voided if the system has been exposed to
mechanical impact, chemicals, high humidity, fluids, corrosive and hazardous environment or other force majeure factors.
Safety instructions
Please read and follow these safety guidelines in order to maintain safety of operators and people around:
• DO NOT use the system where it can be interfere with other devices and cause any potential danger.
• DO NOT use the system with medical devices.
• DO NOT use the system in hazardous environment.
• DO NOT expose the system to high humidity, chemical environment or mechanical impacts.
• DO NOT attempt to personally repair the system.
The WEEE (Waste Electrical and Electronic Equipment) marking on this product (see left) or its documentation indicates that the
product must not be disposed of together with household waste. To prevent possible harm to human health and/or the environment,
the product must be disposed on in an approved and environmentally safe recycling process. For further information on how to
dispose of this product correctly, contact the system supplier, or the local authority responsible for waste disposal in your area.