elddis Crusader, Owner'S Handbook Manual

Page: 61 / 122

9-28
HOW TO USE YOUR CARAVAN’S EQUIPMENT
Remote control display (fig. 2)
Automatic mode
1) Press the On/Off key.
2) Press the Mode key repeatedly until the
display shows the Automatic symbol.
3) Select the desired temperature using the
Increase temperature or Decrease
temperature keys.
4) Press the Fan speed key repeatedly until the
desired fan speed appears.
Cooling mode
1) Press the On/Off key.
2) Press the Mode key repeatedly until display
shows the Conditioning symbol
3) Select the desired temperature using the
Increase temperature or Decrease
temperature keys.
4) Press the Fan speed key repeatedly until the
desired fan speed appears.
Fig 2
Heating mode
1) Press the On/Off key.
2) Press the Mode key repeatedly until the
display shows the Heating symbol
3) Select the desired temperature using the
Increase temperature or Decrease
temperature keys.
4) Press the Fan speed key repeatedly until the
desired fan speed appears.
WARNING: The heat pump is effective for
outside temperatures down to -29ºC,
below this temperature, its efficiency is
considerably reduced.
Note: If the air conditioner shuts down when in
heating mode the fan will continue running for
several minutes to disperse the heat accumulated
inside the conditioner itself. The fans then shut
down automatically
Note: A flashing Fan Speed symbol on the
display Indicates that no speed has been chosen.
Diffuser Display
The diffuser has a display which also incorporates
the remote control receiver.
When the red light (Fig. 3 ref. A) next to the
legend “Power” is on the air conditioner is
powered by the 230 Vac power supply.
When the green light (Fig. 3 ref. B) next to the
legend “Run” is on the air conditioner is working
in the conditioning mode; if, instead, the red light
(Fig. 3 ref. B) next to the legend “Run” is on the
air conditioner is working in the heating mode.
The display also shows two numbers (Fig. 3 ref.
C) that indicate temperature.
While you are selecting the desired temperature
via the remote control the diffuser display will
show the temperature selected at that moment.
Fig 3