background image

programming menu

system

runtime

groups

switch. times

Programming new switching times

You  can  define  new  switching  times  in 

The numerical value behind " " indicates how 

many free memory slots are still available ( -- = 

all memory slots are occupied). You can program 

only one switching time per direction of motion.

Changing existing switching times

Existing switching times are displayed under the 

set time (e. g. 

) in the menu item 

. If 

the switching time was selected by   it can be 

changed in the menu item 

.

ADD, DEL, DISP, DELP

This is were channels/groups are defined which 

shall be added to a new or existing switching 

time. Only added channels/groups are cont-

rolled by a switching time.

1. Switching time

Press   to open or add a switching time.

→ values to be set are blinking
→ 

 

appears at the bottom

1.  Use 

 to switch between hour and minu-

te. 

2.  Use   or number buttons to enter hour and 

minutes.

3.  Press the direction button   to move on to 

the next item.

This  is  were  you  define  the  switching  time  at 

which a switching command will be carried out.

When editing existing switching times 

you can save changes in the whole  

 menu immediately and return to 

 by pressing  .

       Abort programming by pressing ESC.

2. Weekdays

→ the weekdays are blinking
→ 

 

appears at the bottom

4. Use  to select the desired weekdays.

5.  Press 

 to move on to the next item.  

(press   to move back to the previous 

item) 

This  is  where  the  weekdays  are  defined  at 

which a switching command will be carried out.
The following settings are possible:
• 

whole week (MO - SU)

• 

work week (MO - FR)

• 

weekend (SA, SU)

• 

individual days (e. g. TH)

3. Direction of motion

→ the direction of motion 

  

is blinking

→ 

 appears at the bottom

6.  Select the direction of motion   or   by 

using  .

7.  Move on to the next item by pressing  .  

(move back to the previous item by 

pressing  )

The direction of motion of the shutters is de-

fined.

The following settings are possible:
• 

raise the shutters ( )

• 

lower the shutters ( )

4. Intermediate position

→ the intermediate position 

  

is blinking

→ 

 appears

8. Use  to set the intermediate position in 

steps of five. The percentages refer to the 

runtimes, they are not the absolute position 

of the shutter!

9. Press  to move on to the next item.  

(press   to move back to the previous 

item)

The intermediate positions define how far the 

shutters raise or lower.
In case of the setting "100 %" at: 

: the shutter is lowered and at 
: the shutter is raised. 

The percentage for the intermediate positions 

is set in steps of five.

In order to be able to drive the shutters into an intermediate position, you have to measure the 

runtimes of the respective channels in the 

  menu.

5. ASTRO function

       → the ASTRO function 

  

is blinking 

→ 

 appears

10.  Use the direction buttons   to select the 

ASTRO mode .

11. Press  to save the set switching times 

and quit.
When programming a new switching time 

takes place a change in the menu 

to add the switching time to the channels 

(see „Configuring switching times“).

Please find detailed information about the 

 

ASTRO function on the next page.

In order to use the Astro-function, the 

following values you have to be set in the 

 menu correctly: time, date, coordi-

nates, time zone.

Configuring switching times

Adding channels/groups to  

switching times:

A channel/group can be added to several  

switching times.
1.  Use 

 to select a switching time.

2.  Press  .
3.  Use 

 to select the menu item 

.

4.  Press  .

5. 

Use   to select the channel/group you want 

to add to the switching time.

 

→ channels/groups that have already been 

added cannot be selected

6.  Press   to save and quit. 

→ move back to the menu item 

7.  If necessary, repeat the process in order to 

add further channels/groups.

Deleting channels/groups from  

switching times:

Deleted channels are no longer part  

of the switching time.
1.  Use 

 to select a switching time.

2.  Press  .
3.  Use 

 to select a menu item 

.

4.  Press  .

5. 

Use   to select the channel/group you want 

to delete from the switching time.

6.  Press   to delete and quit. 

→ move back to the menu item 

7.  If necessary, repeat the process in order to 

delete further channels.

Displaying channels/groups of  

switching times:

The menu item only serves for checking  

purposes. You cannot change settings.
1.  Use 

 to select a switching time.

2.  Press  .
3.  Use 

 to select the menu item 

.

4.  Press  .

5. 

Use   to display channels/groups.

6.  Press   or ESC to quit the menu. 

→ move back to the menu item 

Deleting a switching time  

including all settings:

1.  Use 

 to select a switching time.

2.  Press  .
3.  Use 

 to select the menu item 

.

4.  Press  .

5. 

Use   to switch to 

 . 

(at 

 the switching time is not deleted)

6.  Press   to delete and quit. 

→ 

 is shown (2 s) 

→ move back to the menu item 

xx

5

Summary of Contents for RT39









Reviews: