Additional functions:
Sun protection mode:
It is possible to activate or deactivate a sun pro-
tection mode that is supported by a receiver.
If a set brightness value is exceeded and the sun
protection mode is activated, the receiver will lo-
wer the shutter automatically to a shade position.
This function has to be supported by the receiver
in order to use it.
Switching between summertime and
wintertime:
The hand transmitter can be switched to summer-
time or wintertime by pressing only one button.
ASTRO function:
With the ASTRO function it is possible to operate
shutters automatically depending on the current
position of the sun.
Shutters can be raised or lowered intentionally at
sunrise or sunset.
Calculation of the solar time depending
on the location:
By entering the geographical coordinates of your
location and the current date, sunset and sunrise
can be calculated to the minute.
Blocking times:
It is possible to program the earliest and the latest
switching time for the ASTRO function.
The
earliest
blocking time defines the point of
time from which a switching command may be
carried out.
If the sun rises/sets before this point of time, the
shutter will raise/lower only at the programmed
blocking time.
The latest blocking time defines the point of time
on which a switching command has had to be car-
ried out at the latest.
If the sunrise has been calculated only after this
point of time, the switching command will be car-
ried out regardless of current position of the sun.
Programming individual offsets for sunset
and sunrise:
It is possible to offset the switching times calcu
-
lated for sunrise and sunset manually from -120
minutes to +120 minutes.
This temporal offset can be programmed indivi
-
dually in the basic settings (system menu
)
of the hand transmitter for sunrise and sunset.
The setting is valid for all of the channels which
use the ASTRO function.
Model
RT39E5023-01
Technical data
Frequency:
868.30 MHz
Radiated power:
0.02 mW
Modulation: FSK
Coding:
Easywave
Range:
- free field conditions
approx. 150 m
- in the building
approx. 30 m
Channels: 30
Memory slots:
99
Voltage supply:
1 x CR2430 or CR2032
(The term of the transmitter
shortened by use CR2032.)
Power reserve:
approx. 1 min
Operating Temperature: 0 °C to +50 °C
Dimensions:
approx. 120 x 52 x 13 mm
Weight:
74 g (incl. battery CR2430)
Scope of delivery
Hand transmitter incl. timer RT39, operating inst-
ructions, battery CR2430
Intended use
The hand transmitter RT39 may only be used to
operate Easywave radio receivers.
The manufacturer shall not be liable for any da-
mage caused by improper or non-intended use!
Safety instructions
Please read the operating instructions
carefully before using the hand trans-
mitter!
Also read the operating instructions for the de-
vices to be controlled!
The automatic control of systems or devices
that need to be supervised is not permitted!
Do not modify the devices!
Keep the hand transmitter and the batteries
away from children!
Have faulty hand transmitters checked by the
manufacturer!
RT39 Display-Transmitter with Timer
GB
Factory settings
The hand transmitter has been programmed with
the following settings:
•
Time: 00:00 o'clock, date 01. Jan 2015
•
Number of channels: 30
•
Temporal offset: sunrise/sunset ± 0 minutes
•
The ASTRO function has been programmed
with the coordinates of Berlin (52° N, 13° E).
•
Time zone UTC +1
Switching times have not been programmed.
The factory settings can be reset at any time (see
page 7).
Function
The hand transmitter RT39 is used in order to
operate Easywave radio receivers, e. g. lights,
shutters or blinds, manually or time-dependent.
The hand transmitter has 30 radio channels so
that radiograms can be sent to control up to 30
Easywave radio receivers individually or simul-
taneously. The radio channels can be combined
in up to 9 groups for the simultaneous control.
It is possible to program up to 99 switching times.
In case of any voltage supply interruption, the
switching times remain programmed.
The following operating modes are availa-
ble:
1. Automatic mode:
Receivers are controlled depending on time or
with the help of the ASTRO function. The pro-
grammed switching times are active.
The following settings are available in automatic
mode:
•
Day function:
switching period 24 hours or
week function:
switching period one week
•
Individual switching times:
Different swit
-
ching times can be programmed for each
radio channel, each weekday or several
weekdays.
•
Intermediate position:
Lowering shutters
to a desired shade position.
2. Manual mode:
Receivers are controlled only by pressing a but-
ton.
Manual operation is possible in all of the modes.
3. Automatic mode with
partial manual mode:
The programmed switching times as well as the
sun protection/twilight mode are deactivated until
00:00 o'clock. All of the radio receivers are con-
trolled manually. At midnight (00:00 o'clock), the
clock returns automatically to automatic mode.
4. Automatic mode with
holiday mode:
Shutters and other Eaysywave radio receivers
are operated with a random temporal offset (max.
±30 minutes) to the programmed times in auto
-
matic mode. That way, your house appears to be
occupied during your absence.
1
ESC
P
MODE
1
2
3
4
5
6
7
8
9
0
UP/ON (A)
STOP (C)
DOWN/OFF (B)
