Preparing the Telephone
27
Wall installation
Feed the guide tabs (1) on the wall-mounting bracket (2) in the slots (3) on
the rear side of the telephone. Slide the wall-mounting bracket 10 mm up
wards until it audibly locks into place. Drill a hole and insert a screw leav
ing about 5 mm of the screw projecting from the wall. Guide the mounting
hole (4) in the mounting bracket (2) over the screw and slide the telephone
downwards.
Attention:
Ensure there are no cables in the wall at the point
where the hole is drilled.
1
2
3
3
4
Turn the hook in the receiver cradle so that the receiver can be placed on-
hook.
5
5
5
5
5