FOS 100
2.8 Maintenance
Your FOS 100 is maintenance-free. For cleaning please use a dry cloth. Never use aggressive
or caustic detergents.
Before cleaning, remove the power supply unit out of the socket, or put the device
out of operation.
2.9
Uninstallation of the FOS 100
To uninstall the FOS 100, first disconnect all cables, starting with the power supply unit. The
device has to be opened to remove the optical fiber and take the FOS 100 from the wall (see
last section of chapter 2.3). After having removed the fiber and released the fixing screw, the
device can be taken from the wall.
3 Technical
data
Optical interface
(optical receiver and transmitter for voice and data)
Optical fiber link
1 × SC/PC
Ethernet-WAN
100Base-BX /-LX /-FX
Fiber type
Single-mode Fiber; TX: 1310 nm, RX: 1550 nm
LAN interface
(Ethernet Router)
Ethernet LAN
4 × RJ45; Auto MDI / MDIX; Transparent Bridging mode
DHCP
static and dynamic IP address assignment
Telephone services
(analogue telephone interfaces)
Telephone sockets
2 × RJ11
Signalling SIP
Voice Codecs
G.711
Supplementary services
3PTY; CLIP; CLIR; HOLD; CW etc.
Service quality & Security
Quality of service
Diffserv; Type of Service, Class of Service
Firewall
Network Address Translation (NAT); Port Forwarding
Management
Remote Management
SNMP-Management; Dynamic configuration via TFTP
Firmware Update
Remote and local Firmware Update
Powering through plug-in power supply module
Primary voltage (AC)
Operating voltage range
230 V ± 15%
Frequency range
50 Hz … 60 Hz
Current consumption
< 150 mA
18
Version:
2009/01/29
Summary of Contents for Elconnect Fiber FOS 100
Page 23: ...FOS 100 Version 2009 01 29 21...
Page 24: ......
