R
6
en
5 CHANGING MEASUREMENT UNITS
To change the instrument units from °C to °F or vice versa:
1.
Switch off the gauge.
2.
Press
but do not release the button.
3.
While continuing to press
, press
to switch on the gauge.
4.
Continue to press
for seven seconds until the units change in the display.
5.
Release .
6 ERROR MESSAGES
The following error messages may be shown on the display:
‘LO’:
You are attempting to measure below the specified temperature range of the gauge
‘HI’:
You are attempting to measure above the specified temperature range of the gauge
‘Err’:
No probe is fitted or there is a fault with the probe
Summary of Contents for 213/2
Page 1: ...en Elcometer 213 2...
