ELCOM Uniq Tablet ll, User Manual

Page: 10 / 13

10
BEFORE USING THE DEVICE
Prior to using the device it is necessary to connect the power adapter if is the battery is dis-
charged. Connect the power cable to the power adapter. Connect the power cable plug from
the power adapter to the power connector. Plug the power cable into the electrical power
outlet (220V, 50 Hz).
Note: Working hours of the battery depends on the degree of processor load, power profile
selected in the operation, activities.
Note: Before using the Uniq Tablet ll it is a good idea to look over the sections devoted to
methods of controlling the device.
BEFORE USING THE DEVICE
After connecting to the power source press the POWER button on the front of the device for
approximately 3 seconds. The device switches on, which is indicated by the blue LED on the
front of the panel. After performing a quick system test, the operating system is launched.
LOGGING ON TO THE OPERATING SYSTEM
The welcome screen of the operating system differs according to its type and version. De-
pending on the type of the operating system it is possible that your operating system will
request the entry of a user name and password for the user account.
Enter the required information for logging on to the user account and press Enter or click the
button for logging on. If you are creating your own user account with a password, please re-
member the password, as without it you will not be able to log on to your account.
Note: If during logon procedure the computer does not respond to the touch panel controls,
connect an external keyboard and mouse, which will allow you to log on and subse
quently calibrate the touch panel according to the process described in the section
“Calibrating the touch panel“.
SWITCHING OFF
The device can be switched off according to the standard procedure of the operating system or by
touching the POWER button the Uniq Tablet ll go to sleep mode.