ELCOM Euro-50T Mini, User Manual, Page: 82 / 84

82
Helpful advice
Paper ribbon sensor test
The display will show the current state of paper ribbons present in the sensors. Installing and removing
paper from the sensors changes the status depicted on the display, depending on the presence of the
paper in the sensor.
Procedure for starting the test:
Sequence of steps Display
In the P mode, use the

or

buttons and press

TOTAL do
menu pre test to enter the menu for testing the paper ribbon sensor
(P-mode – Sys. parameter – Tests):
Tests
Paper ribbons
Confirm by pressing

TOTAL . If both thermal ribbons are correctly
inserted in the printer, this will appear on the display:
Paper OK
žurnal OK
If there is an error in one of the thermal papers, the display will show
Paper OK
Žurnal error
Complete the test by pressing

TOTAL .
Test OK