ELCOM EK-7000, User Manual

Page: 9 / 13

9
EK-7000
confirm clearing of a key
if this option is switch on, the program will request confirmation before clearing a key. if it is switched off, clearing
will be performed without asking for confirmation from the user.
confirm overwriting of a key
if this option is switched on, the program will ask for confirmation before overwriting a programmed value for a key.
if it is switched off, the overwriting will take place without asking for confirmation from the user.
Launch with a standard type of keyboard
this setting means that upon starting up, the application will not ask the user which type of keyboard to use and
will simply start with a standard type.
Launch with the last used type of keyboard
this setting means that after launching of the program, a new project is created based on the last type of key-
board used.
operations over a key
By pressing the right mouse button, you call up a context menu which offers operations for the keys. the indivi-
dual menu items are described below.
Program a sequence
With the help of the menu item „Programming the current key“ it is possible to program a key the same
as with the use of a double-clicking with the left mouse button on the key.
copy
Programmed values for the currently selected key are saved into the memory for later use. the content of the
original key remains unchanged.
Edit
Programmed values for the currently selected key are saved into the memory for later use, and the key is clea-
red.
save
remembered values (with the help of the copy and Edit functions) are saved to the current position.
replace
inserts remembered values (with the help of the copy and Edit functions) into the actual position, and the previo-
us values of the key will be remembered in the memory for later use.
save from a list of functions
Programming of the current key with values of a key selected from a list of programmed keys. this list of program-
med functions is created during the course of the program. functions used which are or were programmed are
stored into the temporary memory. these codes from the list can then be used when there is a need to change
the layout of the keys on the keyboard. if some of the keys (or all) are cleared, the list of originally programmed
keys can always be found in the list of codes and can be copied to other keys. this list is preserved only until the
opening of a new file or until the program is closed.
simple
the position of the new simple key is set according to the position of the cursor when selecting a function.
Doubling
affiliating of the current key with a neighboring key according to the direction chosen. it is only possible to con-
nect a programmed key with an unprogrammed one.