23
Operation manual VARION® C-POWER – S, M, M+ /
06.2019
Assembly
5.3.7 Connecting the temperature sensors
T1
T2
T3
T4
A
Attach four temperature sensors (T1-T4) to the buffer
tank. When attaching, bear in mind the number of buffer
tanks.
D
“12.1 Hydraulic diagrams” (page 36).
A
Connect a temperature sensor (T5) to the supply line of
the heating circuit.
D
“12.1 Hydraulic diagrams” (page 36).
A
Guide the cables from the temperature sensors (T1-T5)
to the control cabinet.
Observe the associated wiring diagrams for the electrical
connection.
Wiring diagrams.
5.3.8 Connecting the modem
When connecting the modem, the following points must be
observed:
B
If the modem is subjected to high temperatures, it may
not function properly.
B
The length of the connection cable between the control
cabinet and the modem must not exceed 100 m.
A
Fit the modem such that reception is guaranteed.
A
Connect the modem:
Modem manual.
