MAINTENANCE
42/64
EN
6
MAINTENANCE
6 .1
Safety during maintenance
The periodic maintenance is important for safety, good operation and long life cycle of the burner,
reducing also consumption and polluting emissions.
The burner must be serviced at least once a year. Only qualified and authorised personnel shall
carry out maintenance and the calibration of the burner, in accordance with this manual and in
compliance with the local standards and regulations.
DANGER
Danger of death!
-
Contact with live electrical components may cause serious incidents.
-
Only professionally-trained and qualified personal can operate on the electrical system.
-
Before any operation, switch off the power supply to the system by operating the main switch.
CAUTION
Hot surfaces - Risk of burns!
-
Contact with components at high temperatures may cause more or less serious superficial
burns.
-
Operators should wear suitable clothing and personal protective equipment.
-
They should ensure that all components are at ambient temperature before carrying out any
maintenance operations.
FUEL LEAKS
-
Fuel leaks may cause fire to break out.
-
They may be toxic via inhalation and cause skin irritation.
-
Act swiftly to remove the cause of the leak. If it is connected to a maintenance operation, use
the dedicated personal protective equipment.
PRECAUTION
Danger of injury caused by improper use!
Danger of personal injury such as contusions, bruises and cuts due to incorrect handling.
-
Use personal protective equipment as required by applicable legislation, such as safety
shoes and gloves.
CAUTION
Installation, commissioning and maintenance activities must only be carried out by the personnel
of dedicated heating companies specifically qualified to perform these tasks.
IMPORTANT INFORMATION
-
Inspect threaded joints to identify leaks during annual maintenance checks.
-
Replace defective or worn gaskets.
CAUTION
PRECAUTION
CAUTION
Summary of Contents for Firebird FB 2 K LN
Page 63: ...Appendix 63 64 EN 11 NOTES...