Compact67-Slim EtherCAT I/O Block – Slim M8
25 / 28
4.5 Module configuration example (Omron)
This section, through a case of connection configuration in actual operation
process, to let the users fully understand how to use the Compact67_Slim
distributed I/O system. In this case, using the ELCO Compact67_Slim as
EtherCAT slave station to connect the Omron EtherCAT controller NJ301-1100
under the condition that all power and bus connection have been completed,
the device name of Compact67_Slim is assigned as elco67.
The following will show the specific process of software configuration and
debugging.
1
）
Open Sysmac Studio, Click
‘New Project..’
