Turn the decorative frame of sensor anti-clockwise
with proper strength, then insert two screws into the
knock-outs on top cover and screw the sensor on
European standard junction box (See FIG.14).
Cover up the decorative frame and restore power supply.
3.3.3 Surface mount
The protection cap of terminals and spring clip are not
needed to be used when the sensor is surface mounted.
FIG.14
NOTE
There are 7 pairs of knock-outs with various distances from
41 mm to 85 mm on the bottom cover of the combined junction
box off step these pairs of knock-outs can be selected for
different mounting applications (See FIG.15-A). Select the two
same figures (41, 53, 60,,,) on both sides (A and B).
14
EKO07042
Occupancy Sensor
en