iBurst Modem Card Type(UTC) Manual
Connection with PC
In order to use iBurst Modem, your computer must satisfy the following requirements
・
PC Card Slot-Type
Ⅱ
compliant with PC Card Standard 95 or later.
・
PC-AT Compatible PC running WindowsXP/2000/Me/98SE or Mac OS X(MacOSX v10.1.5 or
later).
How to connect
If this is the first time that iBurst Modem is to be used on your computer, it is necessary to install
the device driver first. (Refer to
“iBurst Software installation”
).
The following describes the procedure how to connect iBurst Modem with your computer.
1 Turn on the power to the computer.
2 Insert iBurst Modem into the computer’s PC Card Slot and make sure it is fully fitted in the
slot.
3 Double click the icon of PC Card on the computer’s task tray, and you should see the device
name [iBurst Modem] in the hardware device list of the appearing PC Card dialog window.
How to remove
1 Double click the icon of PC Card on the computer’s task tray, and click the [Stop] button in the
appearing PC Card dialog window. Make sure that you select [iBurst Modem] in the PC Card
dialog window before click the [Stop] button.
2 A popup dialog window with the message [Safe To Remove Hardware] should appear. Click the
[OK] button in the dialog window.
3 Remove iBurst Modem from the computer’s PC Card Slot.
- 9 -
