ELCART
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
Manuale di istruzioni/Scheda tecnica
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 28/02201-00
PAGINA 10 DI 11
Installation and Use
Installation:
1) After unpacked the UPS, check if there are some mechanical parts damaged due to
transport. If the UPS has been damaged, please contact your dealer for assistance.
2) Keep the UPS on a surface with adequate space for right ventilation.
Do not cover ventilation holes.
3) Before making the connection and turn on the UPS, please check the following
conditions:
All equipment connected to the UPS must not exceed the maximum power of the
UPS (as indicated on the rear panel of the 'UPS and specifications).
4) Connect the power cords for input and output on the back of the UPS.
5) Connect the power cord from the UPS to a 220V power AC outlet, including
ground connection. When the power supply (AC) is available, battery will start
charging automatically.
Under the scheme in the figure of the outlet:
6) Please charge batteries at least 24 hours before turning it on.
Power of devices connected must be turned off..
7) Press Power button. The GREEN LED will light.
Turn on the computers connected only after the UPS has switched completely.
8) Press the Power Off button, the UPS will shut down.
L
N
