ELCA XPR-2G, Manual

Page: 23 / 25

XPT/R2G
Pag. 23
N°
Board name/
Component
FUNCTION
DESCRIPTION
1 SINTG Mod. adj Adj. for 75kHz dF with right in level
2 DMPX Pilot level Adj. for 7.5kHz dF in Stereo mode
3 DMPX Pilot frequency Adj. for 19.000kHz
4 MBPN L / R balance Adjust for right balance at 1kHz
5 AL400 Ex Battery fuse 3A T
6 AL400 .+ 15Vdc Adjust to 15 Vdc on J1 connector pin 5
7 AL400 Temp. measure Adjust for right value displayed
8 ACC4G Power offset Adj for 0W out with 0W setted
9 ACC4G Power gain Adj for 4W out with 4W setted
10 ACC4G BPF. Adj on the out frequency by network-analyzer
11 A4GP RF Ampl. fuse 1.6A T
12 A4GP Max V rf ampl. Adj. for 10Vdc on the MGF0906 drain (rf ampl.)
13 A4GP Rf ampl drive curr Adj. for 0.2A on the MGF0905 drain
14 PW SUPPL.
Main pw. suppl.
Adj. for 24Vdc out
15 A4GP Rf ampl. curr. Adj. for 0.4A on the MGF0906 drain
16 MBPN In.stereo level Adjust for 75kHz dF in stereo
17 MBPN Stereo Adjust for minimum st. separation at 1kHz
18 MBPN Stereo Adjust for minimum st. separation at 15kHz
19 DLCD Progr. Load. Run / Boot
20 SINTG Local Osc. out Ver. 10dBm out
21 DLCD Reset Press for master reset
22 DLCD CLK battery 3V3 litium
23 DLCD Password ON – OFF
24 MBPN Alarms out Closed or open output alarm contacts output
25 AGC Insertion ON / OFF