ENG man MITO-MINI-915 04
Radio Remote Control System MITO-A-MINI
- Page 16 -
4. BATTERY CHARGER
4.1 OPERATING INSTRUCTIONS
The battery should be charged at an ambient temperature b0° C and +45° C, avoiding power supply failures
during the charging process.
Connect the power supply unit supplied with the battery charger by pushing the plug into the receptacle on battery
charger bottom side.
Connect the power supply unit to the power outlet. The GREEN light turns on.
Place the transmitter onto the battery charger and push down until transmitter clicks into place. The charging process
begins and light changes to RED color.
When the charging process is terminated the light turn GREEN
Placing the transmitter onto the battery charger terminates the radio connection with the receiver, if still active.
NOTE 1:
The charging process will be interrupted outside the allowed temperature range (over 45° C or below 0° C) to protect the
battery. This is indicated by the GREEN light on. The charging process is resumed as soon as temperature is back within
the allowed range.
NOTE 2:
Ensure that the battery is fully charged before storing away the radio remote control for long periods of time. Leaving the
unit unused for long periods with a low battery may significantly shorten product life..
