Set the function of the DMX input
The DMX input can have 3 functions, to change these use the
jog encoder.
Dmx In: function
A
Ok
Press
A
to confirm the function, or press
Quit
to cancel.
Possible DMX input functions are:
1)
No Func
: no function
2)
Control
: the DMX input can control the
ShowSTORE
3)
Merge
: the DMX input is merged (in HTP) with
playback of shows
4)
Thru
: the DMX input is normally connected directly to
the DMX output, also the DMX input fail event is
activated (backup device)
5)
C Insert
: cue insert select a channel that will insert a
cue marker when recording. To set the channel
number press and hold
B
and change with the jog
encoder.
6)
AC612XL
: enable the DMX input to be used as a
direct remote input from AC612XL or focusHAND2
Using AC612XL or focusHAND2 remote
Each of the 16 buttons on the AC612XL can be used
programmed with the same functions as the contact closures.
Example:
Key 1
Æ
Start show 1
Key 2
Æ
Loop show 3
Key 3
Æ
Set show 2 as the next show
The 16 buttons of a focusHAND2 can also be used, follow
the next conversion table: