Rename current configuration
The name of the current configuration is presented in the Main display and in
the dmXLAN software. The name is also used to indicate the configuration
setting when it is stored in one of the 4 built in configurations.
Use the encoder to change the current character, and press the encoder to
select the next.
Press A to store the name
Press B to select the next character
Press
to cancel the operation
Network settings
Use the encoder to change the current parameter, and press to select the
next.
Press A to store the configuration
Press B to select the factory default IP address and netmask
Press
to cancel the operation
Configuration Menu
From the main display press A (config).
Now you can either recall a previous setup or store the current one in one of
the 4 options.
Use the encoder to select a setup
Press A to load the selected configuration
Press B to store the current configuration
Press
to cancel the operation
The 4 contact closures on the back can be used to temporarily recall any of
the 4 setups. The configuration is loaded closing the contact and the normal
