Studio 300 Assembly
Insert one of the centre Rails making sure that the Rail ends rest against the Side Plate
itself and not on the half-shears. Loosely secure using M5 countersunk bolts. Repeat for
the 2
nd
center Rail :-
Figure 6 – Assembly Studio enclosure
Tighten up all bolts ensuring that the Rails
are correctly aligned.
If using our Studio End Cheeks, then secure
them in to place using the M6 countersunk
bolts. Note that the End Cheeks have 2
‘extensions’. These are the ‘feet’ for the
assembly and should be orientated furthest
away from the Rails..
ELBY Designs - Laurie Biddulph
3 Therese Street, Bripdort, TAS 7262, Australia
5 of 5
