CGS348 VCO
ELBY Designs - Laurie Biddulph
9 Follan Close, Kariong, NSW 2250, Australia
2 of 5
Constructors should refer to the printed
along
with the
for the current value of all
components and
for general PCB
assembly guidelines.
Construction of the CGS348 is pretty straight-forward.
The 1K TEMPCO resistor will be the last component to be fitted.
Form the TEMPCO legs and install over the matched transistor
Q101. Once all calibration has been completed and the module is
ready to be ‘locked in’ you may wish to apply a small amount of
heatsink compond between the TEMPCO and Q101.
Not all of the features of the CGS348 are available in the BoCGS
BOG Compact Oscillator but we recommend doing a full install of
all the components.
