ELBO CONTROLLI Nikken E346+, Installation, Operation And Maintenance Manual, Page: 17 / 32

6. MAIN FUNCTIONS DESCRIPTION ELBO CONTROLLI srl
Preset E346+/V+
17
6.3 POWERING OFF MACHINE
It is advisable not to leave the machine turned on for long periods (day after day), it is recommended to
turn it off in the evening at the end of the working day. To do this, press the power button on the right side
of the machine and wait for the machine to turn off, then turn the main switch on the back of the machine
to the position ‘O ‘.
6.4 AXIS MOVEMENT
Axes movements are manual and provide two options: rapid and acute.
The rapid movement is used to move the tool to the visual field and to return it at the end of the
measurement. The acute movement is used to collimate the tool profile and to acquire the measurement.
The transition from rapid movement to the acute movement occurs by unlocking and locking the respective
axes: axis unlocked = rapid movement; axis blocked = acute movement.
6.4.1 RAPID MOVEMENT
In order to rapidly move the axis, rotate the respective
unblocking handle/wheel until the white bullet marker
is positioned on the front part of the machine.
Grip the rapid movement handle (see figure), then
manoeuvre it in the direction desired (X o Z).
As
noted in the figure, the handle for
blocking/unblocking the Z axis is integrated into the
handle of axes movement. Unblocking both axes makes
it possible to move quickly to the measuring zone of the
tool.

In order to prevent damage to the Presetter, do not
strike the limit stops at the end of the stroke.
Handle to block/unblock
axis X and indicates when
axis X is blocked
Rapid movement axis
handle
Handle/Wheel to block/unblock
axis Z and indicates when axis
Z is blocked