36
OTHER BLUETOOTH FUNCTIONS
Resuming Bluetooth Connections
HIFI-1007-BT
can store pairing information for up to seven devices and recall it at any time, allowing a
portable
device to reconnect whenever
HIFI-1007-BT
is powered on, or when a device comes into
communication
range. Once initial pairing is completed, re-pairing of devices is not necessary. If an eighth
device is
paired, the pairing information for the first device is overwritten.
Automatic or manual reconnection of your mobile phone or other Bluetooth device depends on the
reconnection settings of that device. If automatic reconnection is preferred, ensure that the device is
configured to reconnect automatically - typically a device will give the option of automatic reconnection,
manual reconnection, or "Ask" reconnection, where the device will request authorization to reconnect.
Please refer to the user manual of your connected device for details.
Disconnecting Devices
All active Bluetooth connections can be terminated in the following way:
3UHVVDQGKROGWKH
/
%$1' NH\IRUVHFRQGVXQWLOWKHGLVSOD\VKRZV³
DISCONNECT ALL
´,I
DIWHUVHFRQGVWKHGLVSOD\GRHVQRWVKRZDQ\PHVVDJHWKHUHDUHQRDFWLYHFRQQHFWLRQVWRWHUPLQDWH
3OHDVHUHPHPEHUWRGHDFWLYDWHDXWRPDWLFUHFRQQHFWLRQRIDQ\GHYLFH\RXGRQRWZLVKWRUHFRQQHFW
RADIO OPERATION
Press the
FUNCTION
button repeatedly until the main display shows “
TUNER
”.
MW(
AM
)
or FM frequency will appear on the display.
Press the
/
/BAND
button to switch between the
MW
(
AM
)
and
FM
bands.
Tune to the desired station as follows:
Manual Tuning
Repeatedly press the
or
buttons until the display shows the exact
frequency of the desired station. Use the Manual Tuning method to tune to weak or distant stations that
are not strong enough to be recognized by the Automatic Tuning system.
Automatic Tuning
Depress and hold the
or
buttons until the display begins to move, then
release the buttons. The Tuner will search up or down the band for the next strong signal and stop on
that station. Repeat this procedure until the tuner stops on your desired station.
FM Stereo signal is indicated by the
“ST”
indicator.
Press the
ST/MONO
/ID3
button on the remote control to select FM
Mono mode.
If the FM Stereo reception is noisy or weak:
TUNER
TUNER
FM MHz
MW
KHz
FM MHz
TUNER
