21
ENAMELLED PARTS
All the enamelled parts must be cleaned
with a sponge and soapy water or other
non-abrasive products.
Dry preferably with a soft cloth.
Acidic substances like lemon juice,
tomato sauce, vinegar etc. can damage
the enamel if left too long.
STAINLESS STEEL SURFACES
Model PXDO 906 DF
The stainless steel front panels on this
cooker (facia, oven door, drawer or
storage compartment) are protected by
a finger-print proof lacquer.
To avoid damaging this lacquer, do not
clean the stainless steel with abrasive
cleaners or abrasive cloths or scouring
pads.
ONLY SOAP/WARM WATER MUST
BE USED TO CLEAN THE STAINLESS
STEEL SURFACES.
Fig. 7.2
BURNERS
They can be removed and washed only
with soapy water.
Detergents can be used but must not be
abrasive or corrosive.
Do not use abrasive sponges or pads.
Do not put in dishwasher.
After cleaning or washing, check that
burner-caps and burner-heads are dry
before placing them in the respective
housings.
Special attention has to be paid in
order not to exchange the housing of
the small burners shown in fig. 7.2.
It is absolutely necessary to check the
perfect housing of the burner-ring as an
incorrect housing may cause serious
problems.
Check also that the electrodes for
ignition are always clean in order to
ensure a regular spark.
N.B. To avoid damage to the electric
ignition, do not use it when the burners
are not in place.
Burner-cap ring
partially drilled
Burner-cap rings
fully drilled
FLEXIBLE TUBE
From time to time, check the flexible
tube connecting the gas supply to the
cooker.
It must be always in perfect condition;
in case of damage arrange for it to be
replaced by a C.O.R.G.I. registered
installer.
