Elba EVC-G2121CY, Owner'S Manual, Page: 5 / 10

5
ASSEMBLE THE VACUUM CLEANER
*Note: Always remove the plug from the wall outlet before fitting or removing the accessories.
Fitting the flexible hose

Insert the flexible hose into the hose inlet of the appliance body. Press until it clicks into
position firmly.

To remove the flexible hose, press the clip position down of the hose (where the hose is
connected to the air inlet duct) and pull the hose firmly from the air inlet duct.
Fitting the extension tube and accessories

Connect the extension tube to the flexible hose by holding the handle.

To extend the tube, push the part shown below position down of the tube until desired length.
Release thereafter to maintain the extension length.

Fitting the floor brush to the extension tube.