Elba ETP-F5082, Owner'S Manual, Page: 6 / 10

Attach Lid
Place the handle towards the rear side of the thermo pot. Press the hinge lock, at the same time
insert the shaft of the hinge of the lid into the hinge holder. Ensure that the lid is attached properly
and close the lid until it clicks.
OPERATING THE APPLIANCE
To open the lid and fill water
Pull the lid opening lever up to open the lid and fill
water into the water tank.

Always fill water above the minimum water
level mark and below the maximum water
level mark.

Refer to the water level mark in the water
tank.
To close the lid
Close the lid by pressing down until it clicks.

Do not close the lid by force.
1. Insert the connector into the power inlet.
2. Then, insert the plug into the wall outlet.
WARNING: Do not power on the appliance if
the water tank is empty.

Connect the plug to the power inlet
horizontally.
To boil water
1. After power on the thermo pot,
“boil”
（
in
red
）

Do not open the lid or dispense water while
the water is boiling.

Do not add water when water is boiling.

Do not contact any parts of your body to the
steam vent.

Do not place cloth or any other items to
cover the steam vent.