3
PRODUCT DESCRIPTIONS
BEFORE THE FIRST USE
As there is residue or oil remained in the toaster or heating element, it usually will emit the
odour for the first use. It is normal and will not occur after several times use. For the first use
it is suggested to operate according to the below steps, except without bread. Then let the
toaster cool down and begin toasting the first slice.
OPERATING THE BREAD MAKER
1.
Remove all packaging and place the toaster on a flat, stable and heat resistant surface.
2.
Check inside the bread slots to ensure everything has been removed.
3.
Connect the plug to the wall outlet and power on the toaster.
4.
Do not place bread in the toaster for the first use. Instead, lower the bread carriage lever to
allow the heating elements to preheat and burn off any dust and residues which may have
accumulated during manufacturing or assembly.
5.
Once the above is completed, do not operate the toaster when empty.
6.
Insert two slices of bread into the bread slots. The bread carriage lever must be in the up
position when inserting the bread slices.
7.
Set the browning level for the bread by adjusting the browning control knob according to your
desired degree of browning. There are 7 levels the lowest brownish is at “1”. The position “3”
can toast the bread to golden colour. Respectively, position “7” delivers the darkest colour
result. It is always advisable to start the toasting at lowest level first and then adjust
accordingly.
Note: Browed colour of single bread is darker than that of double bread at the same level.
Always try from the lower level to the higher level to avoid over toasted.
8.
Press the bread carriage lever down vertically until it is positioned in place, the indicator of
Cancel will be illuminated and toasting begins. Once the bread has been toasted to the pre-
Summary of Contents for ET-G2770(WH)
Page 5: ...5...
