4
BEFORE THE FIRST USE
As there is residue or oil remained in the toaster or heating element, it usually will emit the
odor for the first use. It is normal and will not occur after several times of usage. For the first
use it is suggested to operate according to following steps, without the bread. Then let the
toaster to cool down before toasting the first slice.
OPERATING THE APPLIANCE
1.
Place the toaster on a flat, stable and heat resistant surface.
2.
Connect the plug to the wall outlet and power on the toaster.
3.
Insert two slices of bread into the bread slots.
4.
Set the level of browning for the bread by adjusting the control knob according to your
desired taste. There are 7 levels; the lowest brownish is at “1”. The position “3” can toast
the bread to golden color. Respectively, position “7” delivers the darkest color result. It is
always advisable to start the toasting at lowest level first and then adjust accordingly.
Note:
Darker browning may be observed on single bread toasting than that of double
bread at the same level.
5.
Press down the carriage handle. Once the bread has been toasted to the preset level, the
carriage handle will bounce up automatically.
Note:
The toasting process can be terminated at any time by pressing the “
Cancel
”
button.
6.
If the toaster is not plugged, the carriage handle will not lock in place.
TOASTING FROZEN BREAD
To toast frozen bread, defrost the bread first by pressing the “Defrost” button and set the
desired browning level by adjusting the control knob. Under this mode the bread will be
toasted to the preset level.
REHEATING TOASTED BREAD
To reheat the cold toasted bread, press the “Reheat” button. Under this mode the toasting
time is fixed. When the time is up, the carriage handle will automatically bounce up to end
the reheating process.
Summary of Contents for ET-D2787
Page 6: ...6...
