Elba ESMB-M3430, Owner'S Manual

Page: 5 / 8

4
5. Put the ingredients into mixer bowl and shall not more than 2.5L. Otherwise, the
ingredients will spill over the edge of the bowl during the mixing. Never add more
than 1.5kg of ingredient (in total) to the mixing bowl. Else, may damaging the
appliance.
6. Ensure the speed selector is at
“0” setting and connect the plug to the wall outlet
and power on.
7. Then dial the speed selector according to your desired setting and the mixer will
start working. There are 5 speed settings and the speed will achieve the highest if
the turbo button is pressed at any time.
Note:
•
Do not put knife, metal spoon, fork and others into the bowl while working.
•
During kneading, some flour may adhere on the side of the bowl, at this time
please stop the appliance and scrape the flour on the wall of mixing bowl by using
plastic spatula to obtain good kneading result.
8. Maximum working time per cycle shall not exceed 10 minutes. Make sure to allow
the unit completely cool down to room temperature before performing next
working cycle. This is to avoid damages on motor unit.
9. When mixing is complete, turn the speed selector to
“0” position and unplug from
power outlet.
10. Press and hold the base button and lift the motor unit with head saddle until the
motor unit is locked into tilt position, then you can also remove the bowl from
base.
11. To remove the motor unit from head saddle, press and hold the release button,
then lift it directly.