4
PREPARATIONS
Soft the laundry to be ironed according to the international symbols on the garment label, or
if this is missing, please refer to the type of fabric.
GARMENT
LABEL
FABRIC
TYPE
THERMOSTAT
REGULATION
synthetic
·
min./low temperature
silk - wool
··
medium temperature
Cotton - linen
···
max./high temperature
Fabric not to be ironed
Start ironing the garments requiring a low temperature.
This reduces the waiting times (the iron takes less time to heat up than to cool down) and
eliminates the risk of scorching the fabric.
STEAM IRONING
FILLING THE RESERVOIR
Check that the plug is disconnected from the socket.
Turn the steam dial (3) to
“
”
[Fig. 5] (please refer to page 8).
Open the lid (2) [Fig. 1].
Raise the tip of the iron to help the water enter the opening without overflowing.
Slowly pour the water into the water tank (10) using the water cup (15) and never
overfill the maximum level indicated by “MAX” on the water tank.
Close the lid (2).
SELECT THE TEMPERATURE
Put the iron in a vertical position.
Connect the plug to the wall outlet.
Adjust the temperature control dial (11) according to the international symbol on the
garment label [Fig. 3]. The indicator light (9) indicates that the iron is heating up. Wait
until the indicator light goes off before ironing.
Warning:
during ironing, indicator light (9) comes on at intervals, indicating that the
selected temperature is maintained. If you lower the temperature after ironing at a high
temperature, do not start ironing until the indicator light comes on again.
