ASSEMBLY INSTRUCTIONS
1.
Fix the vertical pipe to the base.
2.
Loosen and take off the height adjustment screws.
3.
Pull out the extension tube to a required height and
tighten the height adjustment screws.
Caution: The height adjustment screws must be fully
tightened before assembling the motor section to the
pedestal stand.
4.
Fit the motor section to the pedestal stand and tighten the
thumbscrew.
Caution: The thumbscrew must be fully tightened before
the fan is operated.
5.
Set the rear guard in the proper position (handle
uppermost) and screw on the guard retaining nut until it is
tight.
6.
Mount the blade onto the shaft and tighten with the blade
retaining nut (counter-clockwise) firmly.
7.
Open clips on the front guard and attach front guard with
rear guard (align locking screw holes).
8.
Secure both guards firmly by fitting and tightening the
screw and nut.
OPERATING INSTRUCTIONS
1.
Press
“ON/SPEED/OFF” button to switch on the appliance, the fan starts working on
medium speed.
After three seconds, the fan will turn to low speed.
Press “ON/SPEED/OFF” button again to choose a medium speed.
Press “ON/SPEED/OFF” button for the third time, the fan will work on high speed.
Corresponding
“SPEED” indicators will appear on the display.
Press the “ON/SPEED/OFF” button to switch off the appliance.
The room temperature is shown on the display.
2.
Press the timer button for 1 to 8 hours timing, this function can be operated under any mode.
3.
After the fan is switched on, it starts operating in normal mode.
2 different fan modes can be chosen by pressing the
(MODE)
button:
“ ” – fan speed varies to simulate a natural breeze.
“
” – fan speed varies to simulate a sleeping breeze (recommended to use at night).
When operating at
“ ” “Natural breeze” mode, fan motor will operate irregularly. The
change of breeze from high to low speed is constant and the interval is 3 seconds.
When operating
at “
” “Sleep” mode, fan motor operate by program of natural breeze.
When the fan initially setting high speed, fan will operate for half an hour, then varies to
medium natural breeze. After half hour, vary to low natural breeze until the selected time
ended or the switch is turned off.
When the fan initially setting medium speed, fan will operate for half an hour, then varies to
low natural breeze until selected time ended or the switch is turned off.
When the fan initially setting low speed, the fan will still operate in the status of low natural
breeze until selected time ended or the switch is turned off.
Base
adjustment ring
Fasten Height
