15
Before effecting any intervention on
the electrical parts of the appliance,
the connection to the network must be
interrupted.
ELECTRICAL CONNECTION
To connect the supply cable:
•
Remove the screws securing the co-
ver ‘
A
’ on the rear of the cooker (fig.
7.1).
•
Fitted with a 5-pole terminal block,
position the U bolts ‘
C
’ onto terminal
block ‘
B
’ (fig. 7.1) according to the dia
-
gram in fig. 7.2.
•
Feed the supply cable through the
cable clamp ‘
D
’ (fig. 7.1). The supply
cable must be of a suitable size for the
current requirements of the appliance;
see the section “Feeder cable section”.
•
Connect the wires to the terminal block
‘
B
’ as shown in the diagram in figure
7.2.
•
Take up any slack in the cable and se-
cure with the cable clamp ‘
D
’.
•
Replace the cover ‘
A
’.
FEEDER CABLE SECTION
TYPE H05RR-F
220 V ac 60 Hz
3 x 2,5 mm
2
(**)
(**) – Connection with wall box connection
– Diversity factor applied.
– A diversity factor may be applied to
the total loading of the cooker only by
a suitable qualified person.
Fig. 7.1
PE
1 2 3 4 5
N (L
2
)
L
1
230 V
Fig. 7.2
220 V
