Elba EJE-A0435, Owner'S Manual, Page: 4 / 7

(Figure 2)
•
Hold the stainless steel grater and filter
assembly as per figure 2.
•
Install the stainless steel grater and filter
assembly into the motor base.
•
Twist the filter assembly and gently push down
until it is seated on the motor base.
NOTE: The top edge of the grater should not be
higher than the edge of the spout cover when
properly installed.
(Figure 3)
•
Place the pulp chute/ juicer cover on top of the
spout cover so that the facing of the pulp chute
is on the opposite side of the spout.
•
Lock the pulp chute/juicer cover by raising the
safety locking arms until it clicks into the
grooves located on both side of the pulp chute /
juicer cover.
NOTE: Push the saferty locking arms until it “clicks”
otherwise the juice extractor will not operate when
turning on the power.
(Figure 4)
•
Place the juice jug or a glass under the spout.
•
Insert the food pusher into the feeder tube.
•
Connect the plug to wall outlet.
NOTE: Do not power on the appliance with food
loaded into the feeder tube!
PREPARATION OF FRUITS AND VEGETABLES
1. Wash the fruits and vegetables that need to be extracted.
2. Peel fruits that have inedible skins such as citrus fruits, pineapples, melons, papayas, etc.
3. Pit all fruits with seeds such as peaches, nectarines, cherries, etc.
4. Cut the fruits and vegetables such as apples, carrots and cucumbers into small pieces.