Elba EHP-E1881G, Owner'S Manual

Page: 9 / 10

9
16. Baby Milk
Touch the “FUNCTION” icon and select “Baby Milk”, the red light indicator for “Baby Milk” will
light up. The display screen will show the current water temperature and heat up with full power
to 100°C.
After boiling, you will hear the “beeping” sound, the base station will automatically turn
to low power to maintain the temperature between 63°C ~ 65°C for 2 hours before shutting off
automatically
with “beeping” sound.
17. Milk
Touch the “FUNCTION” icon and select “Milk”, the red light indicator for “Milk” will light up. The
display screen will show the current water temperature and heat at low power to maintain the
temperature between 45°C ~ 46°C for 2 hours before shutting off automatically
with “beeping”
sound.
18. Keep Warm
Touch the “FUNCTION” icon and select “Keep Warm”, the red light indicator for “Keep Warm”
will light up. The display screen will show 100. The default operating power level is at 100W. The
water temperature will be maintained between 57°C ~ 60°C and automatically shut off after 2
hours with a “beep” sound.
OPERATING THE APPLIANCE
– (TIMER MODE)
1. Automatic Shut-off Function
-
This function is only available for “HOT POT” mode.
-
Touch the “HOT POT” icon and set the desired power level by using the “ADJUST” icon. After
selecting t
he power level, touch the “TIMER” icon and the display screen will flash and show
“00:10 “ (minutes). To set the desired shut-off time, press the timer key and select between the
range of 5 to 120 minutes. The timer can be adjusted at the interval of 5 minutes each time the
key is pressed. After setting the timer, the display screen will flash 5 times and start to count
down by showing the remaining time.
2. Automatic Start Function (Preset Timer)
- This function is avail
able for all functions except “HOT POT” mode.
-
After selecting the desired cooking functions, while the display screen is still flashing, touch the
“Timer” icon to adjust the desired starting time. When the “Timer” key is pressed, the display
screen will f
lash and show “00:30” (minutes). Press the timer key and select between the range
of 30 minutes to 24 hours. The timer can be adjusted at the interval of 30 minutes each time the
key is pressed. After setting the timer, the display screen will flash 5 times and start to count
down by showing the remaining time.
TROUBLESHOOTING GUIDE
– (FAULTY CODE)
Screen Display
Fault Detected
E4
Heat sensor open circuit or short circuit
No pot is detected
E5
IC error
PCB error
E8
Top plate overheated
Dry-boiled