Elba EF-D2418 Owner'S Manual Download Page 2

REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT. THIS
APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE ENSURE THE
ELECTRICITY SUPPLY TO THIS APPLIANCE IS DISCONNECTED BEFORE INSTALLING.

Please read this instruction carefully. It is advisable to keep this instruction manual in a safe
place for future reference.

SAFETY PRECAUTIONS

1.

Keep this appliance out of reach from children. Do not let them to operate the appliance
without supervision.

2.

Check the current rating on the rating plate and make sure the current supplied is
matched with the appliance before using.

3.

This product must be stationed at least 10cm away from the surrounding objects. There
should not be anything to be placed on top of the appliance.

4.

This product is for household and indoor use only.

5.

This product is not intended for use by person (including children) with reduced physical,
sensory or mental capabilities unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.

6.

If the power cord or plug is damaged, it must be replaced by the service centre or a
qualified service technician to avoid hazard.

7.

This product should not be placed near possible heating resources or under direct
sunlight to avoid decreasing the efficiency of refrigeration.

8.

This product should be placed in a cool dry place where there is no vicinity of water
splashing or high humidity.

WARNING

- to reduce the risk of fire, electrical shock or injury to persons or property, please

read and follow below instructions carefully:

Always operate the product from a power source of the same voltage, frequency and
rating as indicated on the product identification marking.

Do not operate this product if it has malfunctioned, damaged cord or plug or appears
damaged in any way. Return the complete product to the place of purchase for inspection,
repair or replacement.

This product should not be used in the immediate vicinity of water, such as bathtub,
washbowls, swimming pool etc. where the likelihood of splashing could occur.

Always switch off and unplug the plug from outlet when not in use and before cleaning.

When the appliance is operating, the condenser and compressor will be hot.

This appliance must be grounded and the ground wire should not be connected to any
heating pipe and gas pipe.

Do not place carbonated or fizzy drinks into the freezer.

Do not attempt to touch the freezer when your hand is damp or wet as this could cause
skin abrasions or frost burns.

This appliance is designed to operate in ambient temperatures (surrounding air
temperature) between 16ºC and 32ºC.

This appliance will create frost in the freezer compartment if the environment has high
humidity or the freezer lid is opened frequently.

Summary of Contents for EF-D2418










Reviews: