1. INSTALLATION
Position the tumble dryer so that the plug remains accessible after
installation. Do not block the back of the dryer, as this will impair the
working of the dryer. Leave a space of 10cm between the rear of the
tumble dryer to the wall.
This appliance must not be installed behind a lockable door, a sliding
door or a door with hinges on the opposite side to that of the tumble
dryer.
Your tumble dryer will release warm, damp air during operation.
OPTIONAL WATER DRAIN OUTLET INSTALLATION (DRAIN HOSE)
In product with a condenser unit, water accumulates in the water tank during the drying
process. You must empty the accumulated water after each drying process. Instead of
periodically emptying the water tank, you can also use the water drain hose provided with
the product to directly drain the water outside.
1. Pull and take out the end of the hose at the back of the dryer. Do not use any tools
to take out the hose.
2. Fit one end of the water discharge hose, which is provided with the product, to the
slot from which you have removed the hose.
3. Fix the other end of the water discharge hose directly to the water outlet or sink.
NOTE:
The hose must be connected in a manner that it cannot be displaced. If the hose comes
out during water discharge, there might be flooding in your house.
2