Use
1.
Place the machine on a flat surface.
2.
Open the kettle. Then fill in some water. Please do not overfill the kettle. Refer to the
water level indicator inside the kettle for min and max water level..
3.
Close the lid by releasing the unlocking button on the handle.
Place the kettle flush on the base
Electrical Connection
4.
Switch the kettle on with the switch in the handle bottom. The indicator light turns up.
5.
The kettle switches off automatically when the water has boiled. Now disconnect the
kettle from the mains power supply. Always hold the lid closed when pouring the
water out. Beware of scalding!
Cleaning
·
Always pull out the plug from the socket before cleaning!
·
The exterior of the machine should be cleaned, if necessary, with a slightly damp cloth
without additives.
Decalcification
·
The frequency of the decalcifying operation depends on the hardness of the water and on
how often the appliance is used.
·
If the machine switches off before the water boils, it probably needs to be decalcified.
·
Please do not use vinegar but a commercially available decalcification agent on the basis
of citric acid. Only use the quantities stated in the instructions.
Power supply: 220-240V~50Hz, 1500-1785W
Correct Disposal of this product
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where
the product was purchased. They can take this product for
environmental safe recycling.
Summary of Contents for ECK-B1040
Page 5: ......
