Elba ECH-A9004ST, Owner'S Manual

Page: 8 / 10

TIMER
This hob is equipped with a 1 to 99 minutes cooking timer. To use the timed cooking,
first activate the cooking zone and set the desired power level from 1 to 9.
Once the power level is set, press the
“time” symbol. The LED display will turn on to
indicate the minutes to be set of the particular zone.
The duration of cooking time is determined by this LED display and can be set by
pressing the
“+” and “-” button.
The timer will start after the time is set and idle for 5 seconds and will stop when the
display countdown to 0. At this point, the hob will automatically turn off.
It is possible to control two cooking zones using one LED display. Press the
“time”
button to shift the cooking zones and repeat the steps above.
To adjust the timer once it is set, press the
“time” button until the LED display
flashing and press the
“+” and “-” button again.
RESIDUAL HEAT
Each cooking zone is equipped with a residual heat detecting device. After the
cooking zone is switched off, a flashing
“H” will appear on the display. This warns
that the cooking zone is still hot and avoid touching the surface.
OPERATION ERROR
If the user makes a mistake when using the push-buttons, an
“E” will appear on the
display. User has to activate the hob again for further operation.
SWITCHING OFF
The cooking zone will be automatically switched off when the power level is at
“0” for 5
seconds. The symbol
“H” will appear on the display if the surface is hot.