Elba EBO-D7080D(SS), Owner'S Manual

Page: 4 / 14

2. ATTENTIONS

In order to avoid electric shock, please make sure the oven has been shut off before
carrying out the maintenance.

Use only original accessories provided by ELBA or its authorized service center.

Do not use wet parts of body to touch the oven.

Do not pull and push the oven by its supply cord, this may lead to socket disconnection.

Improper or dangerous operations are forbidden.

Do not let the power cord of other appliances to touch the heated parts of the oven.

The oven should not be exposed to rain or direct sunshine.

Do not use or store flammable objects near to the oven.
Distributors decline all liability for not following above instructions or some improper operations
which caused personal injury and property loss.
3. INSTALLATION
3.1 Before the Installation

Please check the products and make sure that there is no damage caused by striking or
heavy load.

The oven door is level, and you can open and close the oven door flexibly.

Specification on the marking plate is in compliance with the regulations.
If the oven appears in an abnormal way, do not install and unplug the power supply before
contacting the authorized service center. Do not attempt to repair or service the oven by yourself.
Repair or maintenance should only be carried out by a qualified technician or the authorized
service center.
This appliance must be installed only by qualified technician or the authorized service center.
Manufacturer declines all responsibility for improper installation, which may harm persons and
cause damage to the property.
Important:

The power supply to the appliance must be cut off before any adjustments or
maintenance work is carried out.

The AC power supply should be supplied with 220-240V, 50/60Hz with minimum 15A
distribution circuit fuse or at least 15A distribution circuit breaker.